Flat Out Day

Vehicle Eligibility

• Any closed-wheel car is eligible provided it meets safety criteria.
• Certain trucks and SUV’s are allowed to participate if suitably prepared. You must call for approval.
• Roll bars are required for all convertibles and they must run with tops up unless equipped with 5-point harness & arm restraints.  Functional factory roll hoops and pop-up styles are acceptable.
• Targa-style roofs are also acceptable so long as panels are in place or equipped with 5-point harness & arm restraints.
• A technical inspection by a qualified mechanic must be conducted prior to the event and a signed Vehicle Technical Inspection Form must be presented before your vehicle will be permitted on the track.
• While BeaveRun will not be conducting its own vehicle inspection at the track, the car may be subjected to a cursory technical inspection and denied entry to the track if it does not conform to our Technical Inspection Guidelines. See our Technical Inspection Guidelines.
• Novice and intermediate drivers (Groups 1 and 2) must have a vehicle equipped with a passenger seat and seat belt(s) for an instructor which are equivalent to that which is installed for the driver.

General Policies

• Flat Out Days are "rain or shine" events (like car and bike roadracing and football).
• Cars will not be admitted to the track without a properly completed and signed Vehicle Technical Inspection Form.  This form should be printed out and completed in advance of the Flat Out Day (see Vehicle Eligibility Section above) and then presented to the Event Official stationed in the False Grid.  The form can be obtained at the track or by clicking the following link: Vehicle Technical Inspection Form
• Snell SA-rated helmets (2000 or newer) are required.  Must have Snell sticker affixed to inside of helmet.  DOT motorcycle helmets are not acceptable.  Don't spend a bundle on your car and only a few bucks protecting your head.  A limited number of rental helmets are available.
• Gates will open at 7:30 am.
• All participants MUST attend the driver’s meeting, which begins promptly at 8:30 am. You should arrive early enough to allow time to register, remove all loose items from your car and otherwise prepare your car and yourself for your driving sessions.
• You will NOT be allowed to participate if you miss the drivers meeting.

Technical Inspection Guidelines

Technical Inspection Form