About this event
Track Direction: Counter-Clockwise
Registration Fees: $275
No Tech inspection required. We expect you all to please check over your machines.
Riders Meeting will be at 6:30AM
Track is HOT from 7AM-2PM
Please plan accordingly
Overnight camping is allowed
Event requirements
Compact Octane is committed to providing a safe and un-crowded track day experience. If you have any questions please email us at info@compactoctane.com.
Compact Octane will run this event as an OPEN TRACK/NO SESSIONS event. Track will go cold for 15 mins for lunch at 11am.
Rider Requirements
- You must be 18 years old. If you are under the age of 18 please contact us, we may be able to make special considerations.
- You must have working knowledge and comfort with the operation of your motorcycle and all of its controls. A minimum of 6 months riding experience is required.
Rider Equipment
Protective Suit: A one or two-piece protective suit is required. Two-piece suits must zip together fully. Leather or Kevlar suits are preferred.
Helmet: BSI, DOT, or SNELL full-face helmet with face shield are required.
Boots: Leather, Lycra, Kevlar or similar material motorcycle riding boots that fully cover the top of the ankle and MUST overlap your suit's pant leg. No external laces allowed.
Gloves: Undamaged gauntlet style gloves with full wrist coverage (must overlap sleeve of suit/jacket).
Back Protector: ALL RIDERS MUST WEAR A BACK PROTECTOR.
Bike Preparation
- All bikes MUST pass technical inspection prior to admittance to the track. If your bike DOES NOT pass tech inspection, you will NOT receive a refund or credit.
- Tires should be in excellent (like new) condition. Any tires with shredding, cracking or flat spots will not pass tech inspection.
- Brake levers (front and rear) must function properly, without excess pull/play.
- All lights / lenses must be taped over. We also suggest pulling fuses so the tape will not melt onto the lens. Side mirrors must be taped over or removed.
- All motorcycles must have an operational kill switch/button and self-closing throttle in good working condition.
- Wheel balance weights must be taped over.
- License plates must have bolts taped or be removed.
- We strongly suggest safety wiring your oil drain plug.